How to Cap a Stair Edge Laminate Read
Many homeowners with laminate flooring installed throughout their homes want to know what to do when it comes to their stairs and treads; what are your laminate stair options? This Dwelling house Flooring Pros "How-To" guide explores your options including costs and how to install laminate flooring on stairs for each cloth.
Homeowners take ii options for laminate on stairs:
1). Install prefabricated laminate stair treads
2). Use the same plank laminate flooring on stairs that you're installing elsewhere.
Let's get going and take a look at prefab treads.
Prefabricated Laminate Stair Treads
The material cost for laminate stairs is college than for standard laminate planks, but the installation price is a niggling lower. That's the trade-off.
Dwelling Depot sells Cap a Tread laminate stair treads that include stair nosing.
- Width: 47"
- Depth: 12.5"
- Bullnose height: 1" or 1 eleven/sixteen"
- Cost: $fifty-$55
- Installation Toll $forty-$lx per tread
If you lot're doing the math, you see that the treads cover nigh exactly 4 square feet, so cost is roughly $12.fifty to $thirteen.75 per square pes. Cost is about double when pro installation is included. Even if your stairs are less than 47" wide, you need one per tread considering obviously you tin't piece together chip ends to cover a tread.
Annotation: The manufacturer literature mentions 94" wide treads too. But those we located on Home Depot are all listed as Discontinued. We checked Amazon, and they're listed equally Currently Unavailable.
Cap a Tread Review
What are Cap a Tread laminate stair treads? The manufacturer, Zamma, calls Cap a Tread a "laminated stair renewal system."
The prefabricated stair treads are fabricated from medium density fiberboard, unremarkably referred to merely as MDF.
MDF is an engineered wood product made from wood that has been shredded into cobweb. Wax is mixed in to prevent moisture damage. The materials are combined with resin and glue, so put through a hot press machine to cook the resins and compress the materials into boards.
Like all laminate, the treads are so capped with a photographic prototype and covered in a clear clothing layer.
Cap a Tread Pros
Two thicknesses are made: Standard for stairs upwardly to 1" thick and Type 2 for stars between 1" and i iii/4″.
- Treads are made for "closed" stairs, pregnant at that place is wall on either side, and "open" stairs that have 1 finished side, either "right return" or "left return" referring to which side is finished.
- Dwelling house Depot carries about 100+ Cap a Tread options in all common laminate colors and looks.
- Matching wood-look risers and a white riser pick are available plus matching transitions and molding.
- The warranty is xx years, similar to midgrade laminate and some premium laminate floor. For example, Home Depot TrafficMaster laminate floor is backed with a xv-year warranty. Mohawk laminate has a "lifetime" warranty, but it is prorated afterwards five years, so it doesn't offer skilful long-term protection.
- Installation takes nearly one-half the time of installing plank floor on stair treads. The process is described below.
Cons
- While easier than installing planks on stairs, it'due south even so a challenging job to get correct. Pro installation is recommended for all but the handiest homeowners.
- They must be cut with a very sharp blade by someone understanding the process, or the surface might chip along the cut.
- Like many building materials, Cap a Tread carries a California Prop 65 Alert, "Drilling, sawing, sanding or machining woods products can expose you to wood dust, a substance known to the State of California to crusade cancer. Avoid inhaling wood dust or utilise a dust mask or other safeguards for personal protection."
Cap a Tread Installation
The starting time footstep is to measure the nose on your stairs to determine whether you need standard or Type 2 Cap a Treads.
And if your staircase is open up on one side, be sure to order/purchase the correct product.
Now, here is how to install laminate floor on stairs using Cap a Tread.
And y'all'll demand virtually 1 tube of construction agglutinative for every ii tread and riser combinations.
1). Acclimate the treads. Bring the boxes indoors 3-four days ahead of installation to allow them to reach the temperature and humidity level of your home.
2). Measure the width and depth of each tread independently.
iii). Mark the measurements on the underside of the tread.
4). Cut the tread depth with a miter saw and width with a table saw.
five). Dry out fit each of the laminate stairs.
6). Employ adhesive effectually the edge of the laminate stairs and beyond the tread in a zig-zag fashion.
vii). Firmly press the laminate stair tread into place.
8). Measure, cut and install the risers with the same approach.
Hither is Dwelling house Depot'due south video tutorial.
Laminate Floor Planks Installed as Stair Treads
This is our second laminate stair selection. Before a brief installation guide, permit'due south crunch the numbers.
- Laminate Planks: Average Cost – $2.00 to $iii.50 per square foot, or well-nigh $viii.00 to $14.00 per stair.
- Installation Cost: $60-$100 per stair.
With Cap a Tread, you're looking at around $90 to $115 per tread for materials and installation.
For average-priced planks, the cost would be $68 to $115 per stair.
If you're going to DIY, using planks is price-effective. For pro installation, it will pay to become estimates from several local installers to run across whether you can save money using plank floor.
How to Install Laminate Flooring on Stairs
For DIY installation here are the essential steps.
i). Remove the nosing – the overhang – from each stair tread. A reciprocating saw is ideal. You'll add a laminate nosing later.
two). Use a chisel and and then sand the cut. The tread must be flush with the riser below.
3). Measure out and cut the laminate, leaving room for the nosing. For example, if the tread is 11" deep and the nosing will embrace the forepart 1", you need 10" of floor. Pros similar to cut two or three pieces of laminate the same width. For example, if you're using half-dozen" laminate and the tread is 10" deep (minus the stair olfactory organ depth), cut 2 pieces five″ for a balanced await.
four). Glue the two pieces together, tongue to groove. Do this for all the stairs, and mark them on the dorsum, so yous know which assembly goes on which stair.
five). Measure, cut and glue together the riser pieces. And cut all your stair nosing pieces and number them.
6). When y'all've got all your tread and riser assemblies completed, showtime at the top of the stairs and work your way down. Dry fit everything.
seven). Employ iii lines – or use the zig zag method – of construction glue to the subfloor.
8). Firmly printing the tread assembly onto the tread, groove side out, and wipe off whatever glue that is squeezed out.
9). Ditto for the riser, but hold information technology in place for a minute.
x). Apply a bead of glue to the exposed tread – the front end border non covered by the planks. Firmly press the nosing into place, and remove excess glue.
11). Secure the nosing with small wood screws. Cover the nosing with clear tape or painter'due south tape. Drill pilot holes, and install the screws, countersinking them slightly. Cover the screws with matching forest filler, and when information technology hardens, remove the record.
How to Cap a Stair Edge Laminate Read
Source: https://www.homeflooringpros.com/laminate-stairs/
0 Response to "How to Cap a Stair Edge Laminate Read"
Post a Comment